Air compressors serve a plethora of services, such as blowing up balloons to filling our car tires, paintball games, and many more things. Hence, it is natural to assume that these machines find a natural place in the garage of any person who intends to make the most of their time and space.
Buying an air compressor without any knowledge is a hard task. Along with it, install an air compressor in garage isn’t a simple step. You need to be careful and wary of several things, since dealing with air compressors can often be life-threatening if not accounted for carefully.
Worry not. Here, we’ll go through the steps and procedures of how you can install an air compressor in your garage!
6 Steps to Install an Air Compressor in Garage
1) Be clear about the essentials!
Air compressors come in all shapes and sizes. Hence, it’s wise to be careful and meticulous in what you’re after. Here are a few specifications to keep in mind.
- Cubic feet per minute
This factor determines how much ‘air’ is produced by your compressor. The compressor you’re investing in should meet the general requirement of the other tools in your garage.
- Pounds per square inch
This is the pressure of the air that is delivered in the compressor. All equipment requires different degrees of psi, but it’s usually a good practice to have an air compressor for a home garage that fulfills the requirements of other stuff as well.
- Tank volume
This is the amount of air your compressor can hold at any given time. Generally speaking, the higher the volume, the more accessible the machine is from time to time.
- Duty Cycle
The duty cycle is the amount of time the air compressor can function before it needs to be shut down for cooling purposes.
Invest in an air compressor that serves other equipment best so that you don’t have to wait for your compressor to cool down unnecessarily!
2) Find a suitable location
Choose a place in your garage where you want to install your brand new air compressor. Keep into account that several factors will affect its output.
In general, make sure that it’s in a spot where you have absolute access to the compressor and don’t have to worry about bending over or stretching to access the back of it.
3) Select a hose length
Hose length should be chosen by how far you believe you’ll be extending the applications of your compressor. However, do note that the length of the hose affects the quality of the compressed air, which might decrease with increasing length.
If you’re installing an air compressor for residential use only, a 50ft hose will suit you just fine since it will most likely extend out to your driveway as well.
4) Set your compressor on isolator pads
Isolator pads serve the purpose of reducing the noise that machines such as air compressors produce. By absorbing the resultant kinetic energy, isolator pads massively lessen the effect of vibration and the subsequent noise produced.
Furthermore, isolator pads also reduce the effect of vibration on ground degradation and help keep your floor clean and smooth!
5) Connect the compressor to a nearby outlet!
Choose an outlet that is nearby but isn’t ‘in the way’ so that you don’t have to worry about tripping over wires. Additionally, don’t use extensions since power shortages might result in undesired consequences.
6) Activate the pneumatic tools
Once these are activated, you’re good to go. Ensure that the devices are in working order and of top-notch quality so that you-you’re all set and don’t have to worry about inefficient machinery.